Taylor Machine Works Featured at White House

In July, President Trump hosted companies from across the country at the White House for the Made in America Product Showcase. The White House was highlighting and celebrating each state’s effort and commitment to American made products by bringing in and showing off products from all 50 states that are made and produced in the United States. Cal-Lift Inc. is proud to represent, Taylor Machine Works, the company chosen to represent Mississippi at the event. Below is a picture taken at the event featuring a Taylor as part of the celebration of American businesses.

Big Red at White House - sm

Companies participating in the event, by state, included:

State Company Product
Alabama Altec Bucket trucks
Alaska Alaska Bowl Company Bowls
Arizona PING Golf Golf clubs
Arkansas Hytrol Conveyer belt
California The California Wine Institute Wine
Colorado Gordon Signs Neon signs
Connecticut Sikorsky Helicopters
Delaware ILC Dover LP NASA space suit
Florida Tervis Tumblers
Georgia Chick Fil A Food
Hawaii Koloa Rum Co. Rum
Idaho Boise Cascade Company Engineered wood floors
Illinois Caterpillar Heavy equipment manufacturer
Indiana Broomcorn Johnnys Brooms
Iowa RMA Armament Body armor, dummies
Kansas Grasshopper Company Lawnmower
Kentucky Campbellsville Apparel Company Apparel
Louisiana Marucci Sports Baseball bats
Maine Hinckley Yachts Yacht
Maryland Eddie Heath’s Crab Pots Crab pot manufacturer
Massachusetts St. Pierre Manufacturing Corporation Horseshoes
Michigan Milton Manufacturing Fabric
Minnesota Faribault Woolen Mill Wool blankets
Mississippi Taylor Machine Works Forklift
Missouri Beehler Corporation Door hinges
Montana Simms Fishing Fishing gear
Nebraska Greater Omaha Packing Beef
Nevada Kimmie Candy Candy
New Hampshire Cider Belly Doughnuts Doughnut company
New Jersey Campbells Soup Soup
New Mexico Desert Plastics Plastic Manufacturer
New York Steinway Piano
North Carolina Cheerwine Soda
North Dakota Dakota Outerwear Co. Military outerwear manufacturer
Ohio Bully Tools Shovels, rakes, hoes etc.
Oklahoma DitchWitch Trencher/excavator
Oregon Leupold and Stevens Sights and scopes
Pennsylvania Ames Wheel barrows
Rhode Island Narragansett Brewing Company Beer
South Carolina Casual Cushion Company Cushions
South Dakota K Bar J Leather Shotgun chaps
Tennessee Gibson Guitars Guitars
Texas Stetson Hats Cowboy hats
Utah Colonial Flag Company Flags
Vermont Dubie Family Maple Maple syrup
Virginia National Capital Flag Company Flags
Washington Liberty Bottleworks Water bottles
West Virginia Homer Laughlin China Company Iconic fiesta line of china
Wisconsin Pierce Manufacturing Two firetrucks
Wyoming Aviat Aircraft Model aircraft

The Trump Administration is honoring the incredible workers and companies who make “Made in America” the world standard for quality and craftsmanship. America is a nation that honors the work of gifted and skilled tradespeople.

The President has also taken steps to ensure that Americans are equipped with the tools necessary to thrive in the modern economy by signing an Executive Order to promote and create more flexible apprenticeship programs that arm American workers with valuable skills.

We are proud to represent Taylor Machine Work’s products. Taylor has a history of the highest quality, heavy-duty forklifts on the market. Learn more about Taylor Machine Works.

Cal-Lift Receives Honors from CLARK

At the recent annual celebration for CLARK Material Handling dealerships, Cal-Lift Inc. was honored to be recognized as a CLARK “Dealer of Merit.” This award is reserved for dealerships whose service, parts and sales departments exceed CLARK’s stringent qualifications.

“We are very proud of all of our employees who helped make this possible” said our President, Mark Maechling. “Without the dedication of each and every employee at Cal-Lift, these types of honors would not be possible” he added.

Cal-Lift, Inc. believes that by operating at a high level of ethics and responsibility, we are best able to serve our customer’s short, and long-term goals, and is represented in our Mission Statement.

“We are Cal-Lift.  We succeed because we make a difference for our customers and manufacturers by providing the right equipment supported by superior parts and service.

Our success depends upon us being a customer-focused team. We empower our people to make good decisions. We partner with our manufacturers to deliver the highest value equipment solutions.  We seek to forge strong long-term reciprocal relationships with our customers.

By doing all the above, we establish the foundation to maintain consistently strong and stable financial and market performance.”

Along with our Dealer of Merit Award, Cal-Lift’s Rental Manager, Charlie Schwasz was recognized by CLARK as “Rental Manager of the Year.” Charlie received this national recognition above all other CLARK dealership’s rental managers because of his dedication to providing the rental equipment our customers need, when they need it, and making sure that it is in top operating condition. All of us at Cal-Lift Inc. congratulate Charlie and thank him for his dedication to our customers.

PHOTOS:

DOM Award - smLeft to Right (Mike Marrs, VP Sales, Cal-Lift; Mark Maechling, President, Cal-Lift; Herb Michelli and Rick Dalhke, CLARK Material Handling)

Charlie SchwaszLeft to Right (Charlie Schwasz, Rental Manager, Cal-Lift Inc.; Rick Dalhke, CLARK Material Handling)

Cal-Lift Helps Daylight Transport “Go Green” with BYD Forklifts

Daylight FacilityCal-Lift has entered into an agreement with Daylight Transport to provide the first fleet of
BYD forklifts that include revolutionary, maintenance free, Iron-Phosphate (Fe) battery technology.  By using the world’s safest, most environmentally friendly batteries, Daylight Transport will eliminate all the hazards and liabilities associated with toxic lead-acid batteries and increase productivity and operational savings.

Using the BYD forklifts will enable Daylight Transport to meet their goal of having a 100 percent green terminal.  Cal-Lift has provided material handling solutions to Southern California since 1964 and sees BYD forklift as being the future of green technology.

When Daylight opened its new Fontana distribution facility, their goal was to minimize the carbon footprint and they’ve all but eliminated it. The 57,300 sq. ft. derives 85% of its energy requirements from a 600KW solar system mounted to the roof of the building (see photo). Motion sensors and energy efficient lighting help reduce consumption, as does the new fleet of 40 BYD  3, and 4-wheel electric forklifts, supplied by Cal-Lift.

We are proud to be part of Daylight Transport’s efforts to go green, minimize its impact on the Earth and provide them with forklifts that help them achieve these energy goals.

Learn more about BYD forklifts, then contact us at 800-322-5438 for a demo and a quote.

IMG_0930

Mark Maechling, President, Cal-Lift at Daylight Transports Fontana Distribution Facility

IMG_0917

Mike Marrs, Vice President, Cal-Lift at Daylight Transports Fontana Distribution Facility

Section 179 Renewed for 2017

section-179-header

Jan 1, 2017 –   Section 179 is still affected by the “Protecting Americans from Tax Hikes Act of 2015” (PATH Act) that was signed into law on 12/18/2015. This bill expanded the Section 179 deduction limit to $500,000, where it will remain for all of 2017. For those interested, you may read the summary from the Ways and Means committee here.

Section 179 Deduction: Until further notice, Section 179 will be permanent at the $500,000 level. Businesses exceeding a total of $2 million of purchases in qualifying equipment have the Section 179 deduction phase-out dollar-for-dollar and completely eliminated above $2.5 million. Additionally, the Section 179 cap will be indexed to inflation in $10,000 increments in future years.

50% Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.

IMPORTANT THIS YEAR: Section 179 for Current 2017 Tax Year
Section 179 can provide you with significant tax relief for this 2017 tax year, but equipment and software must be financed and in place by midnight December 31, 2017. Use this 2017 Section 179 Calculator to see how much the Section 179 tax deduction can save your company.

2016 Section 179 Tax Information (Last Year)

The PATH ACT passed in December of 2015 affected 2016 and beyond, making the Section 179 deduction for 2016 $500,000. In addition, the 50% Bonus Depreciation was reinstated.
Click Here for the fully updated Section 179 Calculator for tax year 2016 (Last Year).

Answers to the Three Most Common Section 179 Questions

How Much Can I Save on My Taxes in 2017?
It depends on the amount of qualifying equipment and software that you purchase and put into use. See the handy Section 179 Calculator that’s fully updated for 2017, and includes any/all increases from any future legislation.

What Sort of Equipment Qualifies in 2017?
Most tangible business equipment qualifies. Click here for qualifying property.

When Do I Have to Do This By?
Section 179 for 2017 expires midnight, 12/31/2017. If you wish to deduct the full price of your equipment from your 2017 taxes and take advantage of the new higher deduction limits, it must be purchased and put into service by then.

Many businesses are finding Section 179 Qualified Financing to be an attractive option in 2017, especially since the expected Federal Discount Rate increases don’t leave much time for action. Please apply today.

More Section 179 Deduction Questions Answered

Welcome to Section179.Org, your definitive resource for all things Section 179. We’ve brought together a large amount of information regarding Section 179, and clearly and honestly discuss the various aspects of IRS §179 in plain language. This will allow you to make the best possible financial decisions for your company.

Section 179 can be extremely profitable to you, so it is to your benefit to learn as much as possible. To begin, you may have a lot of questions regarding Section 179 such as:

We’ll answer all of these questions, and make certain that you come away with all of the knowledge you need to make smart business decisions in this 2017 tax year regarding equipment and/or software purchasing and Section 179.

Why? Because if you’ve been thinking about buying or leasing new equipment and/or software, it’s definitely to your advantage to use this excellent tax break.

Successful businesses take advantage of legal tax incentives to help lower their operating costs. The Section 179 Deduction is a tax incentive that is easy to use, and gives businesses an incentive to invest in themselves by adding capital equipment. In short, taking advantage of the Section 179 Deduction will help your business keep more capital, while also getting needed equipment, vehicles, and software.

Free Tools that Make Calculating Section 179 Deductions Simple

Section 179 is really very simple. You buy, finance or lease qualifying equipment and/or software, and then take a full tax deduction on it this year (also, there are a few other things, which we’ll go over, but in a nutshell, that’s the idea). To give you an estimate of how much money you can save, here’s a Section 179 Deduction Calculator to make computing Section 179 deductions simple.

If you use the calculator, take note of the savings on your tax obligation. Many people find that, if they lease or finance their Section 179 qualified equipment, the tax savings actually exceed the first year’s payments on the equipment (making buying equipment profitable for the current tax year). This is perfectly legal, and a good example of the incentive that Section 179 provides small and medium businesses.

Visit our website to learn more about our line-up of new material handling equipment, including:

Cal-Lift is your source in Southern California for quality material handling equipment, service, parts and rentals. Visit our website to learn more. Then contact us for a quote at 800-322-5438.

 

Cal-Lift Welcomes New Customer

All of us at Cal-Lift Inc. appreciate the opportunity to demonstrate our ability to delivery the best material handling products, service, parts and lift truck rentals to new customers. And this month, we appreciate that opportunity given to us by our newest customer, Double-R Trading.

Double-R Trading, located in City of Industry has specialized in plastic recycling since 2013 and recently upgraded their forklift fleet by ordering (2) new CLARK C25L, 5,000lb pneumatic tire forklifts for their fleet.

This picture features John Fang, Operations, of Double-R, taking delivery of the new forklifts. We welcome Double-R to the Cal-Lift family and look forward a productive future for us both!

double-r-trading-new-clarks