Taylor Machine Works, All-American, All the Time

Designed, engineered and built in Louisville, Mississippi, Taylor Machine Works are the most dependable, reliable, lowest cost heavy-duty forklifts on the market.This short video highlights a company built on trust and dedicated to building quality products. Next time you’re considering Container Handlers, Forklifts or other Heavy-Duty Lift Trucks, check out our line-up of Taylor Machine Works, then Contact Us for more information or a quote.

CLARK GEX Electric Forklifts

In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments, leaving you with the thought…two “hands” aren’t always better than one.

  • Dual reversing drive motors and zero turn steer axle allow right angle stacking similar to that of a cushion tire electric. Solid pneumatic tires plus enclosed motors and sealed controls allow the truck to operate outdoors as well, making the GEX an excellent indoor/outdoor truck.
  • Zero turn steer axle provides the tightest possible turning radius. 2-wheel drive provides added traction, especially on wet or uneven surfaces.
  • The rear control cover is hinged and supported by gas springs for easy service access from a standing position. On board diagnostics allow servicing mechanic to check fault codes
    without service tool.

Visit our CLARK Forklift Showroom.

Section 179 Renewed for 2017

section-179-header

Jan 1, 2017 –   Section 179 is still affected by the “Protecting Americans from Tax Hikes Act of 2015” (PATH Act) that was signed into law on 12/18/2015. This bill expanded the Section 179 deduction limit to $500,000, where it will remain for all of 2017. For those interested, you may read the summary from the Ways and Means committee here.

Section 179 Deduction: Until further notice, Section 179 will be permanent at the $500,000 level. Businesses exceeding a total of $2 million of purchases in qualifying equipment have the Section 179 deduction phase-out dollar-for-dollar and completely eliminated above $2.5 million. Additionally, the Section 179 cap will be indexed to inflation in $10,000 increments in future years.

50% Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.

IMPORTANT THIS YEAR: Section 179 for Current 2017 Tax Year
Section 179 can provide you with significant tax relief for this 2017 tax year, but equipment and software must be financed and in place by midnight December 31, 2017. Use this 2017 Section 179 Calculator to see how much the Section 179 tax deduction can save your company.

2016 Section 179 Tax Information (Last Year)

The PATH ACT passed in December of 2015 affected 2016 and beyond, making the Section 179 deduction for 2016 $500,000. In addition, the 50% Bonus Depreciation was reinstated.
Click Here for the fully updated Section 179 Calculator for tax year 2016 (Last Year).

Answers to the Three Most Common Section 179 Questions

How Much Can I Save on My Taxes in 2017?
It depends on the amount of qualifying equipment and software that you purchase and put into use. See the handy Section 179 Calculator that’s fully updated for 2017, and includes any/all increases from any future legislation.

What Sort of Equipment Qualifies in 2017?
Most tangible business equipment qualifies. Click here for qualifying property.

When Do I Have to Do This By?
Section 179 for 2017 expires midnight, 12/31/2017. If you wish to deduct the full price of your equipment from your 2017 taxes and take advantage of the new higher deduction limits, it must be purchased and put into service by then.

Many businesses are finding Section 179 Qualified Financing to be an attractive option in 2017, especially since the expected Federal Discount Rate increases don’t leave much time for action. Please apply today.

More Section 179 Deduction Questions Answered

Welcome to Section179.Org, your definitive resource for all things Section 179. We’ve brought together a large amount of information regarding Section 179, and clearly and honestly discuss the various aspects of IRS §179 in plain language. This will allow you to make the best possible financial decisions for your company.

Section 179 can be extremely profitable to you, so it is to your benefit to learn as much as possible. To begin, you may have a lot of questions regarding Section 179 such as:

We’ll answer all of these questions, and make certain that you come away with all of the knowledge you need to make smart business decisions in this 2017 tax year regarding equipment and/or software purchasing and Section 179.

Why? Because if you’ve been thinking about buying or leasing new equipment and/or software, it’s definitely to your advantage to use this excellent tax break.

Successful businesses take advantage of legal tax incentives to help lower their operating costs. The Section 179 Deduction is a tax incentive that is easy to use, and gives businesses an incentive to invest in themselves by adding capital equipment. In short, taking advantage of the Section 179 Deduction will help your business keep more capital, while also getting needed equipment, vehicles, and software.

Free Tools that Make Calculating Section 179 Deductions Simple

Section 179 is really very simple. You buy, finance or lease qualifying equipment and/or software, and then take a full tax deduction on it this year (also, there are a few other things, which we’ll go over, but in a nutshell, that’s the idea). To give you an estimate of how much money you can save, here’s a Section 179 Deduction Calculator to make computing Section 179 deductions simple.

If you use the calculator, take note of the savings on your tax obligation. Many people find that, if they lease or finance their Section 179 qualified equipment, the tax savings actually exceed the first year’s payments on the equipment (making buying equipment profitable for the current tax year). This is perfectly legal, and a good example of the incentive that Section 179 provides small and medium businesses.

Visit our website to learn more about our line-up of new material handling equipment, including:

Cal-Lift is your source in Southern California for quality material handling equipment, service, parts and rentals. Visit our website to learn more. Then contact us for a quote at 800-322-5438.

 

CLARK Centennial Edition Forklift Unveiled


In 2017, CLARK Material Handling is celebrating 100 years of producing some of the world’s highest quality material handling equipment and they are celebrating by introducing the CLARK Centennial Edition forklift series.

All CLARK GEN2, pneumatic forklifts, 3,000lb to 7,000lb will automatically include;

  • Special Centennial Edition Paint Scheme
  • Centennial Edition Package Logos
  • Special Seat Trim to Commemorate the Milestone
  • In addition to the Centennial Edition forklifts, CLARK is extending ALL CLASS 1, 2, 4 and 5 forklift warranties for 2017. The special warranty includes an additional 1 year to the existing warranty or 2,000 hours, whichever comes first. CLARK Centennial Warranty for 2017

Cal-Lift Inc. is proud to be your source in Southern California for CLARK forklifts. We will be celebrating this milestone with them all year, and hope you will join us.

Visit our CLARK Material Handling Showroom to see their line-up of forklifts

Four Reasons to Consider Electric Forklifts

Slowly but surely, electric forklifts are carrying more of the daily material handling load. Some of the reasons are obvious, but it is clear to most that eventually we must do more than continue to burn fossil fuels in the transportation of our products.

We still have a ways to go before electric forklifts can perform all the tasks as well as their LP forklift counterparts. However, most forklift manufacturers are improving performance and outdoor durability with each passing year. It is only a matter of time before they catch up.  There a good reasons for this transfer of power, a few major reasons are:

  1. Reduced maintenance costs – Electric forklifts have fewer moving parts than their internal combustion counterparts. Fewer parts, means reduced maintenance, which results in a considerable reduction in maintenance.
  2. Greatly reduced environmental impact – Electric forklift do not burn fossil fuels, reducing carbon footprint. They also require no disposal of motor oils. The units stay cleaner as a result and so does your operation!
  3. Improved ergonomics and working environment – Electric forklifts are quieter with nearly no vibrations to deal with. This provides a more comfortable operating atmosphere for your forklift operators as well as the rest of the personnel that work around your lift trucks. Noise in your facility is reduced to almost zero when it comes to your lift trucks, making communications between employees easier.
  4. Supply chain trends to go green – Every year, more and more companies are encouraging if not outright requiring their suppliers to improve their impact on the environment and electric forklifts are one of the major steps that companies are taking to do so.

While we have some work to do, it’s pretty clear that electric forklifts are making great strides to become a mainstay in materials handling equipment. And right now with the introduction of Lithium Ion Batteries in our BYD Forklift line-up and Section 179 tax deductions, there has never been a better time to consider trading in your internal combustion forklifts for a smooth running, cost saving electric powered lift truck.

To learn more about electric lift trucks and what they can mean to your operation, please contact us at 800-322-LIFT.

Four Essentials of a Safe Forklift Fleet

There are plenty of simple, small things you can do to improve forklift safety in your facility. These include keeping the floor clean, installing mirrors at the ends of your aisles and prominently displaying safety posters. We have identified five best practices within companies that take forklift safety to the next level.  They are:

  1. Operator and Pedestrian Training – When we say training, we mean true training. A one-day class and a 10-minute hands-on review will not suffice if your goal is to make your forklift fleet a truly safe one. In addition to initial training and refresher training, you must be sure you re-train staff any time you introduce a different piece of equipment, if an operator is re-assigned or if your operation or facility undergoes any significant changes.  In addition to operator training, you should ensure the safety of all your employees and guests by providing training to every employee about how lift equipment operates, the inherent dangers of being around them and how to conduct themselves in a facility with this equipment.
  2. Utilize available safety equipment – Ensuring that all your lift equipment and facility is equipped with up-to-date and working safety functions will go a long way in creating awareness of the presence of lift equipment. Back-up alarms, horns, lights (front and rear combo) and strobes are the hallmarks of forklifts that are easily seen and heard. In addition, be sure to ask your forklift provider about available optional safety equipment.
  3. Planned maintenance – A robust planned maintenance program will catch small maintenance issues before they blossom into giant repair headaches. This will also dramatically reduce potential accidents, making your facility a safer place to work. Your planned maintenance program should be developed based on how your forklifts are utilized, your manufacturers recommendations and should be carried out by a professional, trained staff of forklift technicians.
  4. Regular Inspections – We recommend two types of inspections. The first, as required by OSHA, are daily inspections and are a must for any company. Your operators must be trained to perform accurate and thorough inspections of both Internal Combustion (IC) forklifts, electric forklifts, and any other type of lifting equipment you operate. Damage from previous operations can occur without the operator knowing it, and failure of major components can lead to serious injury, product loss and facility damage. In addition, putting your forklift fleet on a regular service cycle or Planned Maintenance Program, performed by lift truck professionals. This is the key to achieving maximum safety, up-time and productivity.

The benefits of a safe forklift fleet go far beyond reducing injuries. They include:

  • Lower Costs – Having safe forklift operators and providing a safe operating environment, like having safe automobile drivers and better roads, will reduce your operating costs. The frequently inspected equipment will operate within normal guidelines and minor service issues won’t blossom into giant repair headaches.
  • Improved Productivity – Safe operators in a safe environment will be more productive, since down time is reduced as a result of sound equipment and reduced operator and pedestrian accidents.
  • Reduced Insurance and Workers Compensation – A safe work environment with well-trained operators will likely result in lower insurance rates and workers’ compensation in injury-related claims.

Forklift safety is no accident. Taking these measures puts you on the path to creating a safe and productive work environment for your employees.  An investment in safety and productivity adds to your company’s long-term bottom line and benefits those who operate on and around forklifts.

Have a question about forklift safety, training, service or planned maintenance? Please contact your local Cal-Lift branch, or give us a call at 800-322-5438.

BYD is the Future of Electric Forklifts

byd_header

BYD has been revolutionizing the rechargeable battery industry since 1995 in industries such as consumer electronics, energy storage, transportation and now the material handling industry. Compared to traditional electric forklifts, BYD’s extraordinary technology turns the industry inside-out by delivering a single-battery multi-shift solution.

battery      charging

Designed to work together with its disruptive battery technology, BYD forklifts challenge the status-quo; creating a new standard of what operators expect from an electric forklift.

awardAWARD WINNING FORKLIFT
The industry has voted. BYD was awarded the prestigious IFOY Award in 016. These world-class forklifts are designed and built for reliability and operational savings.

battery
INDUSTRY’S BEST WARRANTY
Included in each forklift is a warranty that will make others jealous. 10-year warranty on batteries, 5-year warranty on drive axle, and 3-year warranty on all remaining components.

bottle
NON-TOXIC BATTERIES
Unlike Lead-Acid and most Lithium-ion batteries, BYD’s chemistry features environmentally friendly and non-toxic ingredients. This means no ventilation needed, no water needed and no worry needed.

umbrella
INDOOR AND OUTDOOR OPERATIONS
We made these forklifts so durable that they operate indoors and outdoors; rain or shine. Each forklift features a waterproof sealed battery pack that can be operated in even the toughest conditions.

discover_more

Opportunity_Charging.png


24 HOUR OPERATION — WITHOUT THE WORRY

Spare forklifts, cooling down batteries, and battery swapping are a thing of the past. BYD forklifts charge to full in under 90 mins and runs for 15+ hours. When using opportunity charging, on breaks and downtime, your operation can truly run for 24 hours without thinking about batteries.

Cal-Lift, Inc. is Los Angeles’ source for BYD electric forklifts featuring lithium iron batteries. To learn more about BYD, see our line-up of BYD Electric forklifts.

For a quote or further information, please contact us at 800-322-5438.